From all types of kitchens the most popular are angular. They are convenient, practical, well fit into planning. As a rule, assembly of kitchen furniture is charged to experts, however this work quite can be performed independently.
It is required to you
- - drill;
- - screw driver;
- - screw-driver under cross;
- - bubble level.
Instruction
1. It is very important to choose correctly angular kitchen, proceeding from the room sizes. Define quantity of cabinets, their relative positioning. Pay special attention to corner – cabinets in this place have to be located so that open doors and the put-forward boxes did not interfere with each other.
2. If the kitchen is made to order, carefully measure the room, the error in calculations should not exceed several millimeters. By means of level surely check horizontal position of floors and vertical position of walls in installation site of kitchen. Consider that depth of hinged cabinets has to be less than depth lower. Surely in advance think over water supply to washing, draining, the location of gas-fire and column (if they are). The more carefully you will think over all parts, the less at you will arise problems at assembly.
3. Before assembly of kitchen attentively study the available instructions. Pay attention that various guides of rail for drawers, the rolling-out tanks, etc. it is more convenient to fix before cabinets are collected and established, but only in case places for them are in advance marked.
4. Begin assembly with the central corner, normally it is washing curbstone. Pay attention that in its back wall, perhaps, it is necessary to make several cuts for leading of communications. It is normal situation therefore be not afraid to spoil something – just carefully measure everything that cuts have been made in the right places. Provide free access from internal space of curbstone to valves, threaded connections of flexible eyeliner, etc. If not to provide it, for replacement of the begun to flow eyeliner you should sort part of kitchen.
5. Curbstones, as a rule, gather on screws or screws. Having established washing curbstone, check correctness of its situation, if necessary correct it by means of the support regulated on height. Having made sure that the curbstone is established correctly, begin to establish the sections adjoining it one after another. Pull together walls of the next sections with clamps, level rubber mall before full coincidence of edges, then fasten. Such mounting procedure will provide the absolute accuracy of assembly.
6. For hinge plate of the top cabinets at first define their exact location, plan on wall of point of suspension. In concrete and brick walls it is necessary to drill openings under screws or special hooks. Pay attention that the diameter of bore has to be slightly less than diameter of plastic insert. In this case after screwing of screw the insert will be wedged in opening and will provide reliable fastening.