The built-in cooking panel is the stylish decision for kitchen allowing to save free space. Accompany acquisition of new household kitchen not only complexity of its choice, but also installation. Not are ready to render similar service in all shops or ask for it rather large sums, but having the minimum knowledge, it is possible to make it independently.
It is required to you
- - Cooking surface;
- - fret saw;
- - screw-driver.
Instruction
1. Measure the lower part of design of the built-in panel as the opening of such size needs to be cut in table-top. On table-top by means of pencil and ruler make the drawing of future technical opening. For production of similar works it is necessary to remove table-top from cabinet basis.
2. It is much simpler to carry out mounting of cooking surface when the new complete kitchen is ordered. Here the opening for plate becomes masters, and the owner needs only to fix the panel on table-top. Complete with table-top, fastening elements and sealant are usually applied. It is laid between edges of surface and table-top that allows to record it more densely and to avoid hit of food garbage under surface.
3. To fix the panel in table-top, it is enough to submerge of it in the prepared table-top aperture, to pressure slightly her that she has got up into place. Then it is necessary to twirl screws of fixing fastenings, without making for these special efforts not to deform table-top.
4. After the panel is fixed, it is necessary only to turn on it in network if it eats from electricity. But for this purpose previously it is necessary to attach to it cable and the socket as they in set are absent and to take care of availability in the house of the ground outlet to avoid problems with wiring because of high tension.