Now gas-silicate blocks enjoy wide popularity. They are used when laying walls of the house. Anyone can construct house walls of gas-silicate blocks. It is necessary to know the basic principles of construction only.
1. For a start execute marking of future walls. Choose the main 4 corners of future house and note them. Surely check equality of diagonals. Blocks have to act concerning the base or socle approximately on 5 cm. Extremely it is not recommended to stack blocks in one plane with the base. Moisture will get and filter into the base through joint otherwise. Further it is necessary to pull threads on corners. In advance find wooden bars and hammer into them nails. Drive them into the earth on depth of 20-30 cm and tie to them threads. Final alignment needs to be done by means of two struts. Gradually tighten them to the necessary provision of thread.
2. After that you can start laying of the first row of blocks. You should not forget about waterproofing. It is recommended to apply the reinforced roofing material to this purpose. Fold it double. Lay material under the first row of blocks. Only after that it is possible to be engaged in laying of blocks. In this case you need solution. Knead it in the ratio 1:4 cements and artificial sand. As a result almost dry solution has to turn out. Otherwise you will not be able to level the block as he will constantly sink under the weight on "soft" solution. For the block surely do two "paths" of solution. They have to be located along edge of the block. Height of such path is 5 cm.
3. By means of rubber hammer level the block in the horizontal plane. 4 supporting angular blocks have to be initially exposed. The curvature of your future walls depends on their installation to a large extent. After that you can pass to laying of all other blocks. The second and subsequent ranks become the same way. Among themselves gas-silicate blocks it is possible to fix by means of special glue which is on sale practically in all hardware stores.