How to build the house of gas-silicate

How to build the house of gas-silicate

Housekeeping Hits: 132

Gas-silicate blocks are construction material with excellent qualities. The buildings built by means of gas-silicate at the same time combine properties of wooden and brick houses.

It is required to you

Instruction

1. Define location of future rooms, in other words, mentally provide the already built house: there will be bedroom, and there the living room near which your office will be placed … Such planning is extremely necessary, at this moment the project of the house is created.

2. Make the base. For this purpose execute marking under the base, dig out trench, and then collect and put timbering from boards (it fastens by means of self-tapping screws). As pillow under the base fill sand. Then install fittings and flood the base with concrete (height has to be about 650 mm).

3. Construct socle of the concrete blocks laid in three ranks. Among themselves fasten concrete blocks with cement slurry.

4. Lay double layer of waterproofing and also the beams which are in advance enveloped by parchment on the built socle.

5. Lay the first blocks of gas-silicate on waterproofing course. It is possible to build the house of gas-silicate in two ways. The first way consists in vykladyvaniye of brick verst, and then verst from gas-silicate blocks. By means of mesh masonry reinforcement the binding of bricks with gas-silicate is carried out. In the same case for warming of walls between brick and the gas-silicate block lay polystyrene foam heater. The second way of construction of the house from gas-silicate means construction of box of the building from gas-silicate blocks and the subsequent production of external finishing work (siding, plaster or other ways of finishing of facade of the house).

Author: «MirrorInfo» Dream Team

Print