What can you be necessary for to calculate the area of the parcel? Certainly, it is necessary for payment of taxes. Besides, you have to have a clear view what property you own most effectively to use it. On the site it is possible to place the house, any other constructions and also to lay out garden. The main thing is the nobility how many you have lands and what she will be enough for.
Instruction
1. Make detailed plan of the site. Draw the top view so that the plan reflected all available buildings, distances between them and also large landings (the trees, bushes spinning the plants demanding the place). It makes sense to do "matryoshka": it is the layer-by-layer plan implemented, as a rule, on tracing-paper. On the first layer the contour and underground services, is applied on the second – constructions, on the third – landings, etc.
2. Create the new drawing. Precisely determine site projection by already available plan. Before you begin to enter any specific sizes, specify measuring unit. As basic measurement unit choose meter. Then decide on the scale of your project. For example, let it will be 1:400.
3. Now get acquainted with such concept as azimuth. The azimuth represents the corner on certain area located clockwise between the directions on the North and on measurement point on the set area. You should designate the direction on the North. Prepare the fragment consisting only of one line which will be drawn vertically. As type of the line choose ""invisible"". Record the received line two basic linear sizes. These are the sizes down and across. Across choose 0, and down choose any face value, the main thing that it was more than zero.
4. After preliminary preparation of the main contours of future plan, you pass to directly plan of your parcel. Put on the new plan of your site of 13 pieces of straight lines which need to be connected among themselves. Not important, how exactly these 13 pieces will be placed on the plan of the site, their main objective is to make the closed contour. Note all points of the created just closed contour. After that make insert of fragment which you have prepared before on each of noted points.
5. After all inserts are executed, enter specific dimensional information. Each point with insert of fragment has to receive the bearing angle size and also it is necessary to define distance to the following point clockwise. Put the sizes on all points, excepting the last. Its sizes are control, necessary for check of right creation of the drawing.