All want that the bathroom was the place where it is possible to relax, luxuriate as much as possible in warm water, enjoying cosiness which is easily created by mirrors, soft towels and beautiful tile on walls. But to reach the desirable, it is necessary to create this cosiness: to put tile, to decorate walls with mirrors, and then - to add with accessories.
It is required to you
- - tape measure;
- - sheet of paper;
- - pencil or handle.
Instruction
1. Before starting direct measurements of length and width, it is necessary to draw ""turn"" of your bathroom - it will facilitate to you work, so will easier write down and count result. For convenience mark in the drawing each wall (for example, "wall with mirror", "wall with locker") and floor that to mix nothing. Of course, it would be simpler to draw projection of the volume room, but it is usually done by professionals to be guided in the project.
2. That it was more convenient to make measurements, try to release floor at least near two walls. Measure by tape measure length and width of the room on floor and write down the sizes on your drawing. After that measure height and width of each wall, write down.
3. It is necessary to calculate floorage – for this purpose increase the results of its length and width received by you.
4. Now it is necessary to determine the area of each wall: for this purpose increase width by height of each wall. Write down result on your drawing. Perhaps, height of walls on corners will differ – everything depends on quality of construction, the used materials, etc. Then calculate the area on the greatest height, then you will have reserve of finishing material.
5. To receive the total area of your bathroom, put the areas of all walls and floor. The received sum will also give you required size.