Electric stoves are convenient in use, maintain continuous temperature that allows to be sure that food will be cooked as appropriate. In the apartment there is no periodic smell of gas and problems with employees of gas services. However as well as any other electric device or the device, electric stoves can fail. The plate can break completely, that is, breakage can concern one of the basic elements which are responsible for work of plate, and any part can fail. For example, one of rings.
Instruction
1. If it has occurred, you can try to repair plate on guarantee if its term has not expired yet or to call the master if after-sales service does not extend to your electric stove any more. But if you have some skills of repair of similar devices, and you have decided to cope with replacement of ring independently, conform to certain rules that work has ended successfully. Actually, it is not obligatory to be the expert in work with electric devices and to read huge number of literature on electrical equipment independently to carry out replacement of one of the failed rings on your electric stove.
2. Carefully measure diameter and the friend parameters of ring which you are going to change. For acquisition new you need a lot of information. They can differ in insignificant parameters, but as a result, the new ring can not approach your plate. Be attentive upon purchase that it was not necessary to change ring then.
3. Before work prepare tools, namely, screw-drivers, flat-nose pliers, various wrenches. Disconnect electricity. If the socket has automatic machine allowing to be switched-off randomly, can switch-off it. Check that electric current did not arrive to the socket. It for your safety.
4. Remove the electric stove from wall. Places has to be enough for your free movement. Turn off the bolts fixing top cover of plate.
5. After you open and will uncover, accurately turn off the nut fixing ring. Then extremely carefully remove fastening, and after it and wire. The accuracy is necessary in order that then it was not necessary to restore wires for normal operation of your electric stove.
6. Remove old ring and start accession of wires to new in the same order as they have been attached to old. If wires were oxidized a little, it is better to cut them before replacement of ring and to smooth out. Put on grounding, put into place cover, fasten it on all bolts. In case all of you have made as it is necessary, your plate will be for a long time and regularly to serve you.