Have included one more chandelier, and suddenly light has gone out on all apartment: "has beaten out traffic jams". Most likely, the maximum load on the safety lock has been exceeded or there was short circuit.
It is required to you
- - spare fuses;
- - electric sampler;
- - fine copper wire.
Instruction
1. If at you on electric board traffic jams probably are screwed ordinary ceramic that in one of them the safety plug has fused. Turn out stopper. Take out from front part the acting ceramic cylinder with metal caps at faces - it is and there is safety lock. In tubule the wire of certain section is placed. Diameter of inserts also different with identical length. It is called "protection against the fool". The insert with a diameter of 6 mm maintains current in 6 amperes, 8 mm – 10A, 10 mm – 15A and 12 mm on 20A. As you can see, it is impossible to mix and insert the insert overestimated on current. To check whether the safety lock is intact, it is possible with the help elektr. tester or the simplest lampochny sampler. If in stopper the contact has burned, it is impossible to be limited to replacement of insert – it should be changed. If you for emergency have corresponding inserts, just replace burned down and screw stopper. If is not present – that can temporarily be put "bug". The sequence of repair of the electric safety lock is in details shown in the drawing. As soon as possible replace "bug" with the factory safety lock.
2. In case you have automatic traffic jams which are rolled likewise, as normal ceramic, then they will be ""just beaten out"". Unlike normal, the automatic stopper at overload or in case of short circuit is disconnected. Having made sure that everything with wiring is normal, and having disconnected the excess electric device from network, press the white button on stopper and restore chain. The second button, more small and red color, serves for shutdown of chain.
3. At last, the third option: you have household automatic machine (time cut-out). This device combines in itself functions of the safety lock and the switch. They need also to be put parno: on "phase" and "zero". If "has beaten out" the automatic machine, and you have found out and have removed the cause, turn at first the toggle-switch to position "otkl", and then include.