If you have ordered expensive and qualitative plastic windows which meet all modern requirements, then early for the present to calm down. Windows have to conform to requirements for durability, heatsaving and noise isolation. All these qualities directly depend on the correct mounting.
Instruction
1. It is necessary to be able to estimate quality of installation correctly. If to you make installation of the master, then do not hesitate to impose necessary requirements for installation. Misplacement can become result of emergence of numerous problems. The fact is that on double-glazed window condensate can be formed, and it will lead to emergence of mold on slopes of plastic window. Problems can arise with water outflow. It can rattle. These problems arise because of non-compliance with state standard specifications on installation of plastic window.
2. Pay attention to work of masters when mounting windows. Before beginning work, masters have to remove from window frame of shutter. Also the protective film which is from outer end of window has to be removed. Otherwise in several years it can finally be pasted to profile.
3. At installation the horizontal position and vertical position have to be observed strictly. The deviation is possible, but no more than 3 millimeters at all length. Before installation of plastic window to external part of frame the special film PSUL has to be pasted. It does not allow to get to moisture and also does not miss couples.
4. After the window is established, the assembler is obliged to paste paroizolyatsionny tape on profile perimeter. This film provides longer life cycle of window. Besides, it protects field weld from condensate and also mold. Only when all this is executed, the master has to be engaged in filling of distance between frame and wall with foam.
5. The windowsill is established on foam. It has to be got under frame approximately on 1 centimeter. Sometimes it is possible to establish windowsill end-to-end to frame. Between window frame and windowsill the joint has to be surely sealed. For this purpose well silicone sealant approaches.