The washing machine is checked, as a rule, before purchase and at failure. When checking the machine it is necessary to make sure of shop available all necessary papers, to make sure of working capacity and that this model suits you in all respects.
Instruction
1. Enter the list of the documents received upon purchase of the washing machine: - guarantee; - checks; - application instructions.
2. After completion of works on installation and connection of the machine to all communications, it is necessary to check its working capacity on all modes of washing. Before turning on of the machine in network it is necessary to make sure that in it water is pumped, and the draining hose is connected to the system of the sewerage. After that we fill up powder, we set operating mode and we start the machine.
3. The list of the main points to which it is necessary to pay attention when checking. Time of set of water. This operation has to be carried out for short interval of time. Otherwise it is necessary to look for the reason in water supply system (insufficiently strong pressure), or the reason is in fault of inlet valve of the machine.
4. Set level vodybak is filled to certain mark then set of water stops. If water continues to be gathered, then the reason in the faulty valve or the level switch of water.
5. Leakages. Attentively we examine the machine and also floor on availability of smudges. If they are found, then violation of tightness takes place.
6. Powder intake. After set of water we check the doser. The pressure of water has to wash away cleaning agent completely. If powder is washed away not completely, then the system gives insufficiently strong pressure of water, or the inlet valve, one more reason - the wrong direction of pressure in the doser bunker does not work.
7. Rotation of the drum. We check rotation of the drum. If it has not begun to rotate, so the drive belt has flown, the electric motor or heating coil (TEN) does not work.
8. Heating. In 5-7 minutes after the termination of set of water it begins to heat up. If there is no heating, then, most likely, the heating coil does not work, or there is break in chain.
9. It is also necessary to make sure available water drain after washing, availability of extraction, lack of foreign sounds during the operation of the washing machine.