Dry mixes for putty are applied both to interior finish of the room, and to external. Also they differ, from the consumer point of view, to destination. Some mixes are necessary for alignment of walls and ceilings, others – for seal of various slots and cracks, and the third – for processing of decorative elements of interior. Therefore it is necessary to choose dry mixes for spackling works according to their further use.
Instruction
1. Dry mixes for spackling works have number of essential advantages before ready. Treat them: stability of structure at the expense of exact dosage of all components of mixes, possibility of their storage at negative temperatures, high water retention capacity and durability of the put layers and also possibility of consumption of mix in the small portions.
2. The wide choice of dry mixes for spackling works presented at the modern market of finishing materials gives the chance to get the best option for performance of any given type of works.
3. If you need to level concrete, cement or brick surfaces in and outside of the building, give preference to dry putty on cement basis. Such mix is suitable for work both in dry, and in the damp room. You can paste over ready surface with wall-paper or paint.
4. Dry mixes for spackling works on plaster basis are used for interior finish only of dry rooms. Especially widely apply such mixes to alignment of the gipsosoderzhashchy bases and sealing of joints. Cement slurries cannot be applied to these purposes as materials on the basis of plaster are absolutely incompatible with the hydrocured cementing agents to which cement also belongs.
5. For processing of decorative elements of interior use dry spackling mix on organic binding. It differs in high plasticity and convenience in work. The surface processed by such mix is not ground, does not pour, is rather easily ground by abrasive paper.
6. For seal of cracks and joints and also for alignment of ceilings use the polymeric putties possessing coupling large-scale.
7. Glue dry mixes for spackling works apply to gluing of thermal insulation materials in easy plaster systems and also to laying of facing tile.