When choosing kitchen extract it is necessary to consider set of factors, not in view of which, you risk to suffer essential losses.
It is required to you
- - knowledge of dimensions of kitchen stove
Instruction
1. If you wish to buy extract for kitchen, you should know that if you are mistaken with its choice and installation, you not only buy dummy, but also will spoil complete kitchen. Before going to shop, you need to execute measurement of kitchen stove. If you have not bought plate yet, then measure dimensions of that plate which you are going to get. Data on width and depth of plate will be necessary for you.
2. After the sizes of kitchen stove became known to you, you can go behind extract. For what it was necessary to do measurements? From kitchen stove a lot of heat which at the wrong choice of extract by all means will spoil facing of complete kitchen proceeds. Proceeding from it, the acquired extract has to be ten centimeters wider than width of plate and on five centimeters to exceed its depth. Thus, at installation of extract on each party of plate there are about five centimeters of free space which with the correct height of extract will involve all heat from gas-fire.
3. Raising the question of installation of extract, it is necessary to notice that the most optimum height of system over gas-fire is from sixty to seventy centimeters. If you establish extract higher than 70 centimeters – will spoil set, t. to extract will not inhaust all heat if it is established lower than 60 centimeters over plate level – you will burn plastic constructive parts of extract.