If you have decided to execute finishing of the room plastic panels, then first of all you should face the choice of this material of a suitable type. Special attention needs to be paid to quality.
Instruction
1. For a start pay attention to quantity of stiffening fins. Than their is more, that the panel is stronger. Material has to have uniform, without foreign spots tsvetoosnova. Attentively examine also reverse side of the panel. Good panels are always manufactured of quality raw materials. At them there should not be PVC of secondary processing. This material in most cases gives dark inclusions on the surface of the panel.
2. Pay special attention to coloring. It has to be uniform. There should not be greased drawings and not painted over sites. Check joining of panels. Connection has to be the most dense. Do not buy panels which connect not densely. Gaps between front surfaces and also curve edges are inadmissible. Pay attention to availability risok. On their front surface should not be. Also stiffening fins should not be shown.
3. The quality products have high cost. Consider, in the market there are a lot of fakes, they cheaper and, as a rule, poor quality.
4. Big distribution was received by panels from natural wood. Only valuable breeds of wood are applied to their production. You can connect them among themselves on the groove crest system. You can use such material only in that room where there is the minimum change of humidity and temperature. Otherwise panel boards can change the form. Also you can establish them in the hall and the living room. When mounting surely leave ventilating interval between the panel and wall.
5. You can choose for finishing of the room of the panel on the basis of chipboard. The front surface of this material gets off with interline interval from valuable breeds of tree or film with the drawing. This drawing usually imitates wood, stone or marble. They are often used for decoration of the walls. It should be noted, the price of such panels is quite acceptable.