Putty, by definition of the explanatory dictionary of Russian - "the soft, gradually drying up structure for closing up of slots, cracks". Putty can have different structure and be applied to various purposes. How to clean off putty?
It is required to you
- - chisel;
- - soda;
- - lime;
- - linseed oil;
- - rag;
- - caustic sodium;
- - construction hair dryer;
- - rasshivatel of seams;
- - brush;
- - acid cleaner of cement;
- - soap solution;
- - gasoline;
- - ammonia solution;
- - medical alcohol
Instruction
1. Removal window it is possible to zamazkiotchistit from old putty window frames in several ways. Take chisel and it is accurate, without concerning glass and wooden frames, remove top layer of old putty. Wet rag in linseed oil and carefully wipe the remained sealant. Let's oil be absorbed within 30-40 minutes. After putty is softened, remove it by means of chisel. For the same purposes it is possible to use soda solution. For mixing of mortar on 5 parts of water it is necessary to take 2 parts of lime, 1 part of caustic sodium and 1 part of soda. Dissolve soda and caustic sodium in water. Add lime. Apply the received mix on putty and let's it be absorbed within several hours. Remove sealing material, using chisel or knife. Still it is possible to use the construction hair dryer, heating to softening putty hot air.
2. Removal to tiled zamazkivozmita rasshivatel of seams and is accurate, trying not to damage edges of tile, wipe all seams. Remove dust by means of wet brush. Apply special acid cleaner on tiled seams. Remove the softened finish by means of rasshivatel. Repeat the procedure before full cleaning of seams. Carefully wash seams with soap solution, and then clear water.
3. Removal of office putty (proofreader) with odezhdyvnimatelno read the instruction and define the list of the proofreader. It is possible to get rid of the spots left by the proofreader on spirit basis by means of ammonia or medical solution. Oil-based putty is recommended to be deleted by means of gasoline. For removal of spot from the water-based proofreader it is enough to wash fabric in soapsuds.