The mixer which is installed in kitchen daily is exposed to various operational loadings. For this reason it often fails. That correctly to repair it, it is necessary to know for sure the cause of breakage and also to have idea of necessary actions at repair.
It is required to you
- - wire;
- - wrench;
- - rubber gasket;
- - filter of mechanical water treatment;
- - mating rings.
Instruction
1. Quite often at the mixer with valves sealant is erased. To solve this problem, you have to make its replacement. If the crane has mobile having poured out, then it often begins to leak. However all spherical mixers which have the latching mechanism differing in special reliability. Parts manufacture them of quality material. Parts of the mechanism are densely adjusted to each other. Breakage can happen because of high water hardness. You can independently fix problem. Close valve, pick up wire and push it in opening. Move it to the parties and slowly open valve.
2. If there was violation of operation of the crane, then surely check whether breakage is caused by deformation of the closing valve. The problem can arise because of contamination of the mixer. In this case replacement of adjuster lever is required.
3. Most often it is necessary to be engaged in replacement of rubber gaskets. If water begins to exude from under the handle, then immediately replace laying of valve head. For this purpose remove the handle and turn out valve head. Under it there is also rubber gasket. Remove old and put new laying. To turn out valve head, in advance stock up with wrench. Try to find the instruction to the mixer. With its help it will be easier for you to make dismantling and assembly.
4. Sometimes people install the mixers having ceramic the crane axle box. Breakage of this mixer can happen because of sand, limy raid and the rust which is present at tap water. For this reason on water pipe install the filter of mechanical water treatment in advance. This adaptation is capable to prolong mixer life cycle considerably.
5. Also problems can arise with the one-lever mixer. Adjustment of water supply in it is made by means of metal, ceramic or plastic sphere which has openings. If the garbage has got to latching mechanism, then sort it and execute clearing. At once change mating rings.