The frame house represents pre-fabricated and light-weight construction. The main feature of such house is easy timber frame construction which part vertical racks and horizontal bindings are.
Instruction
1. Begin to build the house from construction of floor. He will act as basic site on which then it is possible to make further construction. For this purpose use not cut off board. It has low cost and well is suitable for draft floor. Further lay cross logs. Further it is necessary to stack floorboard on them. You should not forget about warming. Lay heater between logs.
2. Special attention needs to be paid to wall construction. Under bar lay roofing material and put impregnation for wood. It will prevent absorption of moisture and wood. After that attach roofing material anchor bolts through two meters. To expose house geometry, use level. The distortion of far corners of the house should not be more than 1 centimeter. You can use materials of wooden house, floor, load-carrying structures and walls from the same material.
3. For assembly of walls it is necessary to prepare surface. It has to be equal and dry. If it has roughnesses, then the wall will turn out as a result of warped. Be engaged in assembly of framework of wall. In advance cut vertical boards of one size. Standard room height is 2750 millimeters. The ceiling is higher, the will be more cool in the house, both in the summer, and in the winter. Also consider that material consumption will be higher. The low ceiling will ""press"" and cause kind of feeling of discomfort. For this reason it is not necessary to lower it lower than 2400 millimeters.
4. Begin to collect framework from perimeter. Then slowly fill it with vertical boards. They have to be established through equal distance. Distribution of sections can be counted on allowable loads on floor. Most often the spacing of joists makes 60, 40, 30 centimeters. Width between boards directly depends on covering materials.