The device Granit is the receiving and control security and fire device. Granit serves for forming of system of the centralized protection of apartments, cottages, garages and also office and warehouse. Installation of the device Granit has to be carried out by the technical staff which has undergone the corresponding instructing and having necessary admissions. Attempts of independent installation are extremely undesirable and can lead as breakage of the equipment, and to receiving considerable injuries.
Instruction
1. Establish and connect the panel to the address line. For this purpose open packing and carefully examine all parts of the panel. Check completeness and make sure of lack of mechanical damages. It is necessary to know that in case of storage or transportation of the panel at subzero temperatures, before its installation it is necessary to stand her within a day at the room temperature.
2. Unscrew bolts on which the block cover fastens. Turn cover counterclockwise.
3. Accurately mark on wall of the place of fastening of the panel. Attach the panel body to wall by means of screws.
4. Choose the place for installation of TM port and establish it. Connect TM port to the panel.
5. Make mounting of external connections of the panel.
6. Determine time and date on the liquid crystal indicator of the panel according to the instruction.
7. Connect the communication line with the remote controller of the centralized observation, supply circuits of active annunciators, portable sound or light annunciators.
8. Connect the address line to the panel modem payment X1 block "minus" and "plus" terminals.
9. Install the accumulator in the panel. Connect conclusions "minus" and "plus" of supply lead to accumulator terminals. Check safety locks.
10. Connect network wire to panel payment X2 block. Connection happens to the help of the "network 1" and "network 2" terminals.
11. Remove crossing point on payment which is on panel cover backside. Establish crossing point back. Wait for emergence of the message "Enter the engineer's key". Touch TM port with one of the TM keys - record of the code of key of the engineer is made in memory of the panel. Close panel cover.
12. Establish and connect the object device to the address line. For this purpose open packing and carefully examine the device, having checked it for lack of mechanical damages. The object device is mounted on wall according to the instruction for its operation and the existing standard documentation on mounting, tests and commissioning of the OPS installations.