The bench can be beautiful and strong addition of garden. You can construct it the hands. It is the best of all to use for this business pine as this wood differs in natural resistance to bad weather and insects.
1. For a start you need to define accurately in what place your bench will be established. Further it is possible to get directly to work. Lay bar on the earth and apply to it at an angle in 30 ° long bar. The lower face of bar has to be at distance of 45 cm. This design will be support for back. Further on bar note points in which it will connect to bar. After that make pro-saws. By means of chisel prepare groove. The second support for back becomes practically by analogy. Consider that it has to be mirroring of the first support. From bar then it is necessary to cut off two parts on 30 cm - they will be crossbeams for seat. Arrange them at the top faces of brusov-support.
2. Now you need to prepare the hammer and nails. Bring down the left and right support of bench. Jambs should not bring discomfort during rest on bench for this reason you need to think in advance under what corner it will be more convenient to you to lean on back of bench which you can make to the taste. The sizes most often are selected individually. Surely oil ready support lubricating and wind with polyethylene. You can fix this material by means of wire. Such precaution will prevent support from rotting.
3. After that at distance about a meter from each other dig out two holes. Do by with a their depth of 40 cm. In them establish support for bench. Then put on board support of which the seat will consist. You can easily check horizontal position of boards by means of level. The vertical position is most often checked by plumb. In holes fill a little gravel or stones. After that you can cover them with earth. Well stamp both holes. It was necessary only to beat boards for seat. All bench is recommended to be covered with impregnation against rotting.