The shish kebab and grilled vegetables – fine and useful dishes, but that correctly to prepare them, is necessary good brazier. At the dacha you easily will be able to construct brazier independently and at any time with pleasure will fry shish kebabs in the fresh air.
It is required to you
- - parent material (brick burned, silicate stone, etc.);
- - sand, cement and water;
- - sheet steel;
- - tools: the hammer, scissors on metal, bucket, trowel, construction level or plumb.
Instruction
1. Choose allotment with convenient approach and possibility of construction of brazier. Take shovel and dig out deepening in the earth the sizes of 50х100 cm and 25-30 cm in depth (one bayonet). Fill in this deepening with water and nakidayta of large rubble stones. Stamp stones as it is possible more deeply to the earth.
2. Mix cement and sand mix in the ratio 1:6 and fill in with it the stamped stones level with the earth. Let's the base dry and next day construct of stones decorative curbstone 80 cm high with top in the form of niche, the sizes of 30х80 cm and 15 cm in depth. Lay out walls of curbstone 65 cm high with equal top and on perimeter establish bricks on solution, it is desirable on edge (leave small openings for ventilation). Let's design dry.
3. Take steel sheet 1.5-2.0 mm thick. Scissors on metal cut out from it rectangle the sizes of 60х110 cm. Having receded from corner of 15 cm, make cut on the greater side of leaf 15 cm long. Repeat the procedure from the opposite side. At you four cuts located on 15 cm from edge on the big parties of leaf on two on the party have to turn out.
4. Bend at right angle parts of leaf between cuts and also the remained parties. Wrap the parts of leaf which are sticking out from them so that they have coincided with the next party. At you the trough which precisely approaches curbstone niche for brazier has to turn out. For air flow in walls drill openings and establish steel structure in curbstone.
5. To use brazier in rainy weather, make roof. Usually this role is carried out by tin extract of conical form in which center there is opening. On opening of extract mount angular branch and pipe in order that the rain did not get on brazier.