How to construct font

How to construct font

Earlier in Russia the bath generally was under construction on the bank of the lake or the river therefore the font was not required. But today, the font is considered the integral and desirable subject in interior of each bath. The most optimal variant is to construct font own hands, and here is how it is correct to make it, not each fan of bathing procedures knows.

Instruction

1. The most optimal and simple solution – installation of font from tree in washing office. In this case the minimum of efforts will be required to organize water drain. The font represents big wooden barrel of oval or round shape. It is possible to plunge into it filled with water almost completely. It is necessary to equip font with seats for rest and ladders for convenient entrance and exit.

2. Production of font for bath demands from the master of certain cooper's skills. This design gathers from rails and revetings which are pulled together among themselves by means of oval metal hoops. But before starting tightening, it is necessary to use special glued joint, otherwise your new font can leak.

3. As material for production most often serves the larch, oak or cedar. These grades of wood most of vlagoustoychiva, are durable and give tanks solid exterior. Besides, such wood has a number of salutary properties. It is also worth noting that the font made of tree has to be used often, otherwise over time wood will dry. Some owners of baths use special covers from polyethylene for font which keep moisture in barrel.

4. Today on sale there is huge number of plastic fonts for bath of various forms, the sizes and color gamma. Plastic not only is light on weight that is undoubted plus (it is possible to rearrange without effort), but also there can be long time without water and at the same time does not crack. The plastic font can be got with the built-in massager. It is possible to include the imagination and to decorate font by means of decorative stone or other available material.

5. The font, as a rule, should not have legs. It is put by the bottom directly on floor, at the same time emphasis increases. Nearby establish ladder with handles, it is necessary in order that it was convenient to rise to the required level. The profound font as work is similar to construction of the pool is quite difficult in installation. For this purpose preparation of ditch with special warming, water drainage, waterproofing of walls and facing from outer side will be required.

Author: «MirrorInfo» Dream Team


Print