Quite often people think of construction of garage. The main thing in this case is to choose the good and convenient location. If you it have already looked after, that time to think of materials, the project and to start construction of garage.
It is required to you
- - Bar;
- - nails;
- - hammer;
- - concrete;
- - water;
- - gravel;
- - sand;
- - roofing material.
Instruction
1. The garage can be wooden. It well is suitable for owner-occupied dwellings and cottages. If you have decided to build garage in the city, then it is the best of all for this purpose to use safer and strong materials, such as brick, concrete blocks or plates. The wooden garage has many advantages and only one shortcoming. It can be built only in the territory. If you have own earth or owner-occupied dwelling, then can safely be tuned into construction of garage from tree. The fact is that it can be made in one style with other outdoor constructions. Such garage will harmoniously fit into landscape, besides it is easy to build it.
2. For a start it is necessary to clear away site and also to prepare it for mounting of the base. It is possible to use the dot or integral base. If you have decided to use dot, then dig out six holes. After holes are prepared, make pillow by means of gravel and sand. Do not forget it to stamp well. After that fill in holes with solution. Consider, height of each point has to be in one plane with all foundation blocks. For accuracy it is recommended to use thread which stretches on level. Accuracy is the main criterion for construction of wooden garage therefore the base has to be made well.
3. After preparation of the base it is possible to start mounting of framework. Down on points of the base the bar which is to guides for frame assembly is established. It is recommended to use bar of deciduous breed of tree. That the bar did not decay, it is the best of all to cover it with tar solution. At frame construction pay attention to stiffening fins, it is especially necessary to strengthen places of fastening of gate. Walls are put up from bar 100x50 or 150x50. Between them leave distance about 600 millimeters. From outer end of wall sheathe moisture resistant plates. Under them lay Paro-vetroizolyatsiyu. Between bar surely place heater. From the inside it is possible to execute covering gypsum cardboard. After that it is possible to pass to floor. It is usually filled in with concrete, and the wood deck from above lays down.
4. Further it is necessary to make roof. At the moment there are very many good roofing materials. You can use slate or tile. The main thing – the roof should not pass moisture. If you have decided to make direct roof, then surely lay it roofing material. It is recommended to do roofs with inclination. In this case water will not accumulate.