Recently roofing materials with transparent covering are more often used at construction of garages. Advantage of transparent roof is that it passes large number of daylight, and the level of lighting allows to work without additional artificial lighting.
It is required to you
- - tape measure;
- - felt-tip pen;
- - drill;
- - screws;
- - screw driver;
- - transparent plastic;
- - mating rings;
- - sealant;
- - the pro-thinned-out polyfoam.
Instruction
1. Measure the garage roof sizes by means of tape measure. Mark roofing covering so that its sheets laid down with an overlap. Overlap width – one and a half centimeters. Note shear line color felt-tip pen. Consider that the new face has to adjoin edge at an angle of 90 degrees.
2. Drill in sheets of plastic of opening under screws. The diameter of bore has to be more than diameter of hardware on 4 mm. Fix plastic on garage roof by means of screws. Fastenings have to be on every second crest of relief leaf. Plastic – rather fragile material therefore in the course of its fastening limit mechanical influence. It is recommended to use the professional tool – the screw driver.
3. When mounting roofing covering it is necessary to establish mating rings and plastic caps between roof and walls. As additional sealant it is possible to use the pro-thinned-out polyfoam which fastens by means of screws in through holes.
4. If the roof of garage has small bias, fill space under overlap sealant.