Until recently metal garage represented the integral welded design made in the shop and delivered to installation site in finished form. Not so long ago in the market there were combined folding designs which are favourably differing in simplicity of transportation and installation. Now installation of metal garage does not require the special equipment and the welding machine. How to construct metal garage?
It is required to you
- - screw-driver;
- - power drill;
- - wrenches;
- - screw driver;
- - step-ladder;
- - folding metal design;
- - construction level;
- - self-tapping screws;
- - screws
Instruction
1. Choose garage model. Now in the market there are two options of folding metal garages - from professional flooring and from sheet steel. Garage life cycle makes only 25-30 years of sheet steel. However, its purchase will cost to you much cheaper, than acquisition of garage from professional flooring. Models from professional flooring are distinguished by durability and durability. And the special relief and various color gamma allow to enter easily design from this material practically in any architectural complex.
2. Make the base. It is necessary to know that for construction of folding metal garage there is no need to equip continuous footing. It is quite enough to asphalt site of the necessary size or to lay concrete slab. This site has to rise over ground level approximately on 15 cm.
3. Collect framework of metal design. It is necessary to begin assembly with floor elements. Lay the lower guides of framework, bolting them galvanized. For reliability and simplicity of fixing special fixing openings are provided in parts of design. Create corners and establish intermediate racks. Make mounting of rafter profiles of roof. In the course of mounting it is necessary to verify carefully the provision of all elements by means of construction level.
4. Sheathe framework sheet metal plate. The covering is made from right to left, from below up. Attach metal to framework by means of galvanized self-tapping screws. Fastening is made with step to 15 cm.
5. Establish entrance gate. Installation of gate is made according to the instruction and depends on the model chosen by you.