How to construct toilet

How to construct toilet

In owner-occupied dwelling, or at the dacha not to do without toilet in any way. On the value it is comparable with the house, and at some moments even exceeds it on the importance. Though there are difficulties, not everywhere it is possible to dig hole for collecting sewage, it is possible to pollute underground waters and to poison the next wells. Therefore, sometimes it is necessary to use the simplified option, without hole. But, whatever one may do, and it is necessary to build toilet of the toilet system.

It is required to you

  • Wooden columns, boards, asbestos pipes, slate, nails.

Instruction

1. Take four sound columns long on 3 meters everyone, they will be support. Impregnate the lower part of each column with tar or bituminous mastic. Then, take four pipes, they have to be asbestos and cover their outer surface with the same bituminous mastic.

2. Further, drive these pipes in the earth at 70 centimeters in depth. Fill these pipes with concrete, approximately on third and insert into them in advance prepared columns. After cement stiffens, support will be ready.

3. Outside sheathe toilet equal boards, and the roof can be made of the sheet of slate. In back wall, above, make small opening, it will play ventilation role. In the same wall, only below, make one more opening and to it make door. Via this hatch the container with sewage will be removed.

4. From boards hammer together box, it has to look as box, but without one sidewall, it will be toilet seat. That party where there is no wall, establish box closely to the back hatch. Further, cut through in box opening (clear for what) and put under opening any capacity for collecting sewage. After capacity is filled, it easily can be taken via the hatch.

Author: «MirrorInfo» Dream Team


Print