What it is necessary to take care first of all of if you have just bought the site for the dacha on which there are no buildings yet? Correctly, about toilet. You in bushes will not celebrate need. Generally, the speech will go now how it is possible to construct country toilet, having at itself quite standard set of tools and materials.
It is required to you
- - bar of 100х100 mm and 50х50 mm
- - Chipboard or plywood
- - plane
- - screw driver or screw-driver
- - hammer
- - wood saw
- - self-tapping screws of 40 mm and nails of 80 mm
- - sheet of slate or galvanized iron
- - sheet polyfoam
Instruction
1. Before starting to construction toilet, it is necessary to decide on question of dredging. Time which is spent for its extraction depends on type of soil. Depending on type of soil can change several set of tools used to excavation of cesspool. This hole has to be rather deep.
2. Cesspool it is finished. Let's take bar with a section 100 at 100 mm and about 3 meters long and we will make of it framework of our country toilet. And section 50х50 we use bar for sitting production.
3. Let's decide on toilet dimensions. Length we will take 150 cm, width – 100 cm and height – 210 cm. We saw bars by the sizes and half-lap we connect them. Thus, at us 50х50 will turn out. If it is necessary, we will remove roughnesses of connection and we will grind surface. Let's check diagonal by means of kapron thread.
4. Let's count from floor height 50 cm and we will cut bars 50х50 in the bearing bar. We will make crossing point of the same bar at distance about 100 cm from back wall longwise. And on back wall we will start up just the same crossing point. These crossing points will be basis for the device of our sitting.
5. Now we will take the sheet chipboard or plywood and we will cut under the toilet seat size in it opening. Let's fasten leaf to crossing points self-tapping screws by means of the screw driver or the screw-driver. Then we will need to paste polyfoam on walls and to sheathe their chipboard or plywood. About floor we do not forget too.
6. We have in line roof. Let's cut cross bars and we will attach them to walls. On bars we will put the sheet of galvanized iron or wave slate which will need to be strengthened.
7. Let's give to our toilet stability. For this purpose it should be buried to the earth. Let's remember that we from bar had 100х100 piece of 90 cm. It will also be basis for piles. That the bar has easily entered the earth, we will bury at first hollow metal pipe. After that the bar will go to the earth as oil smeared. On it work on construction of country toilet can be considered ended.