How to cut furniture loops

How to cut furniture loops

Housekeeping Hits: 129

Production or assembly of cabinet furniture the hands - work rather laborious and demanding certain skills. One of stages of this process is installation of loops. In the presence of the necessary tool to cut furniture loops quite perhaps independently.

It is required to you

Instruction

1. Define necessary quantity of furniture loops. The quantity of the established hinge mounting depends on width and the weight of door. If necessary installation of three and more loops is possible.

2. Mark the centers of loopy grooves. Depending on the door sizes the distance from groove cent to the top or lower face can make from 65 to 125 mm. The distance from the center of groove to side face of door makes, as a rule, 21-22 mm. At marking it is necessary to watch that installation sites of loops on have coincided with arrangement of crossing points, shelves or other internal elements.

3. Establish edge mill and, disciplining drill vertically, drill openings in the places planned earlier. It is necessary to know that for the majority of furniture loops depth of groove has to be from 12 to 13 mm. When drilling groove it is necessary to work extremely accurately and to watch that the central tooth of drill has not made through hole - in this case facade of your furniture it will be hopeless it is spoiled. To avoid injury of facade, it is recommended to use two edge mills, one of which will demand certain "modernization". Take one mill and accurately cut her central tooth by means of the Bulgarian - now the tool is ready to work. Make sure that the mill is sharply ground - it will allow to avoid chips on surface of furniture and failures of mill. Drill groove of 8 mm in depth by means of normal edge mill. Deepen it to 12-13 mm by means of the "modernized" option.

4. Insert hinge mounting into the drilled groove and correct its provision of rather side face of door. Plan installation site of self-tapping screws by means of pricker.

5. Twirl self-tapping screws by means of the screw-driver. Establish the remained loops by analogy. Your door is ready to installation.

Author: «MirrorInfo» Dream Team

Print