After the door is established, it is necessary to be engaged in mounting of handles and locks. Now the majority of handles for doors has the built-in locks. It is not difficult to mount them. All work can be performed independently.
Instruction
1. For a start choose the place to which you will mount the door handle on door. Then apply it to face of door and make marking under the body. You can make groove by means of chisel. It is the most convenient to clean internal part chisel. In advance drill the most part of groove drill. Work requires drill which diameter is a little less than width of groove. From time to time try to insert the handle into not ready opening. Depth has to be more body of the handle approximately on 3 mm.
2. After you have prepared opening for the handle body with the lock, make marking for the choice of groove. The plane of level has to be located level with door face. Cut the door handle with the lock extremely accurately. Otherwise it is possible to damage door cloth seriously.
3. The handle has to sit down in the made grooves densely. During insert it is necessary to make sure of operability of all mechanisms of the handle. Further make openings for fixing of level. They have to be 1/3 less than screws, and in the diameter at 1 mm less than diameter of screws.
4. Then pass to marking of grooves for crossbar and uvula of latch on box of door cloth. For this purpose just it is necessary to grease their faces with paint. Close door and put in action the mechanism the door handle and key. On door case there has to be print. You can note the place for drilling pencil. For this purpose it is necessary to measure its arrangement with tape measure or ruler. Make openings for these grooves. Also you have to cut down the place for topleniye of locking level. For this purpose apply level to door case. Windows have to be completely combined with grooves. Note contour. Further make dredging for level and establish it. Double-check operability of the handle and lock. At the wrong arrangement the handle and the lock will not perform the functions.