How to dissolve aqueous emulsion ink

How to dissolve aqueous emulsion ink

Aqueous emulsion ink is eco-friendly finishing material. It is easily applied on surface, quickly dries, does not peel off. All these qualities do water dispersive paints very popular when carrying out finishing work. What aqueous emulsion inks and how it is correct to dissolve them are?

It is required to you

  • - gloves;
  • - construction mixer;
  • - bucket;
  • - color;
  • - water.


1. Choose water emulsion paintVodoemulsionnye of paint are intended both for internal, and for external finishing work. This type of paints is suitable for drawing practically for any surface. Water dispersive paints consist of binding substance and pigments. It is possible to allocate several main subspecies of this type of paints. Polyvinyl acetate paints are made on the basis of PVA glue and are, perhaps, the most available at the price. However these subspecies of water emulsion covering are the least steady and, besides, have not really wide color palette. Silicate paints represent solution of liquid glass to which the special pigment is added. This resistant covering applied both to interior finish of the room and for external works. The only lack of silicate paints is their low water-repellent properties. Alkalis which at hit on integument or mucous membranes can cause strong inflammation are part of these paints. Therefore it is necessary to work with them in special suits. Silicone paints are made on the basis of silicone pitches which mix up with water. This type of covering is considered one of the most modern. Acrylic paints are created on the basis of acrylic resins which give to covering additional elasticity and durability. The surface with acrylic covering will possess raised vlago- and wear resistance. Acrylic paints are the most expensive in all line of aqueous emulsion inks. Latex paints are the most popular type of water dispersive coverings. The surfaces painted by such paints can be washed often. Besides, latex paints can protect walls from small mechanical damages. The latex paint put in two layers can close crack 1 mm wide.

2. The active pigments which are part of water dispersive paints contact the help of elements of water. Therefore for dilution of the thickened paint of this look also use potable water. Take clean bucket. Accurately pour paint from banks. Gradually pouring in water and continuously stirring paint by means of the construction mixer, bring its structure to the necessary consistence. If necessary, give to paint right color, using special color. For this purpose take superficial capacity and mix in it color with small amount of aqueous emulsion ink. Gradually pour in the received mix in bucket with the main paint at continuous stirring. Achieve desirable shade.

3. It is possible to apply aqueous emulsion inks by means of the special roller or brush. The covering should be put in 2-3 layers, and each subsequent layer is put only after full drying previous.

Author: «MirrorInfo» Dream Team