To make kitchen convenient and functional, it is necessary to consider set of factors, to carefully consider arrangement of each piece of furniture. Especially it is important on limited space, the most convenient option for small kitchen is angular placement of furniture.
It is required to you
- - tape measure;
- - plan of kitchen;
- - known sizes of furniture and equipment.
Instruction
1. Begin planning of angular kitchen with scheduling of the room. Specify on the plan arrangement of door, windows, knots of communications, arrangement of sockets, gas-fire, washing. If the sizes of any furniture are known to you, draw it in the same scale and cut, for convenient search of optimal variant.
2. At angular planning furniture have along two adjacent walls, and the kitchen table at the same time will rise in free zone. Try to tie planning to the main objects: to plate, fridge and sink.
3. Washing arrange in the middle (the main thing, not in corner), for plate find such place to exclude graze of ware about the preparing food, the fridge has to be located so that the opening door did not block free space.
4. Begin planning with the lower number of cabinets and the furniture (fridge and plate) standing on floor. At the same time at design of the top row consider that width of extract has to be more than width of cooking surface of plate. Depth of the top lockers has to be less, than depth lower – for convenient use and cosiness in kitchen.
5. Do not put the cooking panel and oven near the fridge. Install the dish and washing machine on one line with sink that it was more convenient to connect them. The best place for working surface – between plate and sink.
6. Try to use space of kitchen effectively that the necessary thing could be got practically from any situation. Use corner for additional shelves, there it is possible to store seldom used kitchen utensils.
7. If you are going to order furniture in specialized firm, carry out measurements very carefully that she has ideally fitted into the room. It is the best of all to call the measurer – in that case at discrepancy the firm will remake everything at own expense (if it is stated in the contract).