The most widespread breakages of washing machines are connected with water drain. Fault of the pump, blockage of its filter or sewerage lead to the fact that the machine refuses to drain water upon termination of washing cycle. How to drain water from the washing machine in such situation?
It is required to you
- - flat blade screwdriver;
- - cross screw-driver;
- - capacity for water
Instruction
1. Drain water through drain shlangpozhaluy, it is the fastest way to drain water from the washing machine. It will be possible to use this method in case in this model the draining hose is located in the lower part of the body. Disconnect hose from back wall washingof machines and lower on floor height, previously having put capacity for water.
2. Use drain trubkusledut to consider that the tube for emergency draining is present not at all models of washing machines. As a rule, it is located near the pump strainer, under its cover. Open the decorative panel and make sure available this part. Accurately extend tube, remove from it stub and substitute the prepared capacity for water.
3. Use the filter having sucked the majority of models and brands of washing machines the pump strainer is provided. As a rule, the filter to be in the lower part of the washing machine, on the front panel. Usually it is closed by the decorative panel or the hatch. Remove the decorative panel. In the presence of the hatch - pick up its edge by means of flat blade screwdriver. If the filter is under the narrow decorative panel - define way of its mounting. In case of fastening on locking hooks - establish them vertically by means of the screw-driver and remove the panel. When fastening the panel on latches it is necessary to open its upper part, and then accurately to disconnect latches in the lower part. If the cover plate fastens on the screw and latches - dismantle it, having shifted aside. Slightly incline the washing machine back and place the prepared capacity under the pump strainer. Make sure that the pump strainer is not fixed in addition. If necessary, turn off the attachment screw holding the filter. Undertake the handle of the filter and turn it against hour hand. After capacity is filled with water, twirl the filter and release capacity. Repeat operation before full water drain from the washing machine.