To make predesigns and to make projects much more simply and more conveniently on paper, than than on the site. Having drawn the plan of your site, it will be easy for you to correct all possible errors. And properly to draw the plan of the garden site? There are several nuances.
It is required to you
- - measuring tape (the tape measure is better),
- - metal ruler (1.8 m),
- - pegs,
- - scaled paper,
- - tablet,
- - pencils and eraser.
Instruction
1. Draft option to chertezhasdelayta measurements of basic elements of the site (paths, trees and bushes, garage, etc.) also write down them (it is not necessary to draw on the plan of those elements which are not necessary to you on the new site). You apply objects on the plan, having just measured distance from them to site borders at right angle. If the site not rectangular, just pull rope under right angles to its parties and make necessary measurements. Remember that the preliminary drawing has to be the simplest, you apply on it only the main measurements.
2. Intermediate option chertezhazdes you can give vent to the imagination, just embody all the ideas on the sketch (at the same time try to observe scale). Transfer the first sketch of garden to drawing paper or scaled paper (more preferably). Thus you will be able the extent of borders of your site, the sizes of all objects and amount of construction materials (brick, stone blocks). Draw borders of future site, the house and all that you want to leave from the former site.
3. If the site has the small area, the sketch can be drawn on standard sheet of paper if the site big, then sketches of separate parts draw on several sheets, but make the general plan on big leaf of squared paper. As for scale, scale 1:50 will be suitable for small sites, for sites of the impressive sizes scale choose 1:100.
4. Before you manage to receive final version, most likely, it is necessary to draw not one and not two sketches. Try to use tracing-paper, having imposed it over the main plan and to draw on it, so you will be able to try various options, without spoiling at the same time the plan. Also try to cut basic elements (observing scale) and just move them according to the plan, thinking out new combinations. However after the necessary solution will be found, draw all objects on the plan better, otherwise general impression and integrity of the sketch can be lost.