In life even if very much to make thrifty use of furniture, in use there will be various defects. Part of them can be eliminated by own efforts.
It is required to you
- - hook on sucker
- - dowel
- - rigid brush
- - table salt
- - woolen rag
- - vegetable oil
- - turpentine
- - cardboard
- - dense paper
- - joiner's glue
Instruction
1. If it is necessary to open box of table or bedside table from which the handle has flown away, the hook on sucker will help. It is enough to press hook to box in that place where there was handle, to tighten on itself and the box will move forward.
2. At furniture from chipboard often fly away doors. There is it because of screw which it is bad to keep in walls. To solve problem, the opening under screw needs to be drilled out to diameter of 8 mm, to insert into it dowel (the wooden stopper, is on sale in hardware store) or the piece of piece of wood greased with glue for tree and already in them to wrap screws, then they will strongly keep.
3. It is possible to put in order the polluted upholstery of upholstered furniture so: to hardly wind rigid brush with the clean rag, the wetted in solution of table salt (1 h spoon on 1 l of water) and, to wipe upholstery. In process of pollution to wash up rag and again to moisten in salt solution. The procedure should be repeated until the rag is not clean.
4. To return gloss of lacquered surface, wipe it with the soft woolen rag impregnated with mix from vegetable oil and turpentine (2 parts of oil on 1 part of turpentine).
5. There are doors of cabinet jam or open spontaneously. The reason, as a rule, that the cabinet costs irregularly. Having enclosed cardboard under cabinet legs, it is possible to adjust its situation.
6. For disposal of bubbles and swellings on furniture from natural wood use the iron and dense paper. To put several leaves of dense paper on places of swellings and to iron the iron until bubbles and swellings does not disappear.
7. It is possible to save the cracked and loosened chair, previously having sorted it and having cleaned off residues of glue from position of joints. Then it is necessary to apply joiner's glue on the connected parts and to record them, having densely pressed places of gluing together. It is important to remove excess glue at once, otherwise on surface of furniture there will be spots. In two days the chair can use.