Before starting washing, it is important to define at first with what type of fabric you deal. Various fabrics demand various leaving. Usually information on leaving is on internal label of clothes. But in those cases if information is absent or it is not enough, study the following recommendations.
Instruction
1. Between synthetic and natural fabrics there is one big difference. Natural fabrics, such as cotton, wool, leather, silk, etc., are made of fibers of plants and hair of animals. Synthetic fabrics are made in the artificial way of oil products. Therefore the clothes from synthetics are worn much longer, than from natural fabrics. But at the same time it is important to know how it is correct to clean synthetics not to damage it.
2. Turn things from polyester before washing inside out for prevention of inhalings. Erase in the washing machine and you dry only at low temperature condition.
3. Nylon - quite light, soft and brilliant fabric. Care for it is similar to care for polyester. For reduction of static electricity of clothes use special softeners of fabric.
4. Erase products from artificial silk only manually and only in cool water. Machine wash can easily damage them. After washing surely rinse products in cold water.
5. Very popular type of synthetic fabric - velor. Synthetic velor is in fact purified much easier, than natural as it has ability to absorb water. Therefore you can erase products from it in the washing machine at low temperature condition. However synthetic velor has one unpleasant property to attract to itself all dust. Therefore do not erase product from it together with the fading things at all. After washing you dry clothes from artificial velor at low temperature, and after - comb brush in the direction of pile and against it for recovery of original form of product.
6. Acrylic fabric on the exterior reminds wool. Usually products from acrylic are not rumpled, and it is possible to apply both manual, and machine wash to them. But nevertheless it is better to erase delicate products manually in warm water and to wring out carefully, without overwinding. The largest lack of acrylic products is emergence of pellets over time. You can get rid of them by means of special eliminator of pellets, the trimmer, or safety razor.