Dressing of windows takes very important place in interior design. Without beautifully and with taste of the issued window opening the room will not be simple to have the finished appearance. Eyelets - one of the best ways to emphasize beauty of curtains. Independent installation of eyelets demands patience and accuracy, but quite any hostess can do practically.
It is required to you
- - lyuversny tape;
- - centimetric tape;
- - iron;
- - pencil;
- - scissors.
Instruction
1. Count necessary quantity of lyuversovpra calculation it is necessary to consider that the optimum distance between eyelets has to make, about 16 cm. In order that the drapery of curtains looked beautifully, it is necessary to establish even quantity of eyelets. The distance between the center of the first eyelet and edge of curtain has to make 5-7 cm.
2. Choose it is necessary to lyuversvybirat eyelets proceeding from design of the room, model of curtain and diameter of eaves. It is necessary to consider that the diameter of bore of eyelets has to exceed diameter of eaves, at least, on 1.5 cm.
3. Choose lyuversny lentudlya installations of eyelets it is necessary to strengthen curtain top lyuversny tape. The Lyuversny tape represents strip of thermoglue material. Width of lyuversny tape has to be more outer diameter of eyelet on 2 cm. For transparent fabrics it is recommended to acquire the transparent lyuversny film.
4. Wet curtain fabric, slightly dry and iron the iron. It needs to be made in order that material has shrunk prior to work with it. Otherwise, after the first washing your curtains can be 5-6 cm shorter, than you planned.
5. Process the upper edge to shtoryotmerta from the upper edge of curtain the distance equal to the double width of lyuversny tape, unbend this edge on inner side and smooth down the iron. Enclose lyuversny tape in the turned-out bend. Wrap fabric so that it has rounded tape and once again accurately stick by means of the iron. Fix the top top by machine line.
6. Process sides and bottom of curtains.
7. Mark openings under eyelets. For this purpose spread out curtain on plain surface and plan the provision of extreme eyelets. Calculate and mark the provision of the remained eyelets.
8. Cut by means of scissors or the special punch of opening under eyelets.
9. Impose in turn halves of each of eyelets from two parties of fabric. Make sure that they are located exactly and latch eyelet.