Process of fixing of eaves is not difficult and does not demand special knowledge and tools. Independently practically any house master can hang up eaves. How to fasten eaves the hands?
It is required to you
- - tape measure;
- - perforator;
- - screws;
- - dowels;
- - spirit level;
- - pencil;
- - detector of the buried wiring;
- - screw-driver;
- - hammer;
- - step-ladder
Instruction
1. Make all necessary measurements by means of tape measure. Be verified with the instruction attached to eaves. Approximately plan the locations of brackets.
2. Make sure that in the chosen places there does not pass the buried electric wiring. It is for this purpose recommended to use the special detector.
3. Unpack new eaves. If necessary, cut off it to the necessary length and carefully grind the place of cut.
4. Take bed plate for the first bracket and apply it to the mark made earlier. Make tag on wall through fixing openings of plate by means of pencil.
5. Plan provisions of the second bed plate. Check correctness of arrangement of marks, using long construction level.
6. Pick up the drills suitable to your type of walls. Drill openings of 5 cm in depth in the places planned earlier by means of the perforator. Insert dowels into openings, having killed them with the hammer. Fix bed plate by means of screws.
7. Establish bracket to the slot of plate and, without tightening mounting screw completely, slightly record it.
8. Fix the second bracket for eaves by analogy.
9. Dress rings on eaves. Insert crossbeam into brackets. Put spirit level on eaves and make sure that it is located parallel to ceiling and floor. Make sure that both edges of crossbeam support brackets at identical length. Hardly tighten mounting screws by means of the screw-driver. Your eaves are established.