The mold can appear in any place of the house, however its most favourite place - the bathroom. It is known that distribution of this fungus requires certain temperature and air humidity therefore if to create adverse conditions for its reproduction, then finally the mold will disappear.
In the bathroom the mold most often can be seen between tiles, however not exception and options when the mold affects quite big squares. Depending on distribution of fungus it is also worth choosing methods of fight against it.
For example, if the mold is available on absolutely small site, then in this case it is possible to be limited only to surface treatment by any disinfecting substances if the mold has extended quite strongly then the only correct decision - full replacement of tile on affected area and, naturally, maintenance of certain level of humidity and temperature in this room at the subsequent operation, timely airing of the room (installation of the device which dries the room and does not allow humidity to rise higher than 40%).
As for means which help to get rid of mold, it, mainly, the means containing chlorine. For processing from fungus on smooth surfaces it is possible to use the ammonia solution (divorced 1:1 with water) and also to drill (divorced with water 1:10), by means of the spray to put funds for wall, and hour later to wash with clear water.
Have not bad proved in fight against fungus in the bathroom and normal soda in combination with vinegar and also hydrogen peroxide. In the first case it is required to apply soda on the site struck with fungus, further on soda to spray vinegar, to wait 30-40 minutes and to wash away water, in the second - solution of peroxide to spray 3% for affected area, to allow to dry completely then carefully to clean mechanically.
Now in shop it is possible to find set of means from fungus, you can get the option developed especially for the bathroom and use it according to the instruction. Have not bad proved ""Olympe Stop"" and Dali.