Filling of bulk floor fashionable now can be executed independently, without involvement of experts. It is required to stock up with all necessary materials, tools then it is possible to get to work.
If you independently want to carry out actions for filling of floor, prepare metal brush, to ditch and the roller, rail of two-meter length, scraper and brush. You also need drill, nozzle for mixing, the wide palette, soil.
From floor remove old covering, plinth. Clean surface by means of brush or process the grinding device. Cracks should be expanded by means of triangular scraper. Check whether equal floor – for this purpose put the rule with level to it. Gleams between floor and rail should not be more than 2 mm.
Remove from walls below plaster. Liquidate all slots and cracks on floor by means of solution with the content of glue or pitch.
Before putting primary primer floor should be leveled with use of the special solution prepared from one part of cement and 2.5 parts of sand. If it is necessary to keep some technology cuts, fence off them by means of hermetic fences. Primer should be applied on basis by means of the roller or brush.
If surface too dry, porous, it it is necessary to ground in several layers, well drying up each of them. At the increased humidity indoors for the first layer of primer it is necessary to use waterproof mix.
Prepare solution for floor according to the instruction on packing. It will be necessary to pour out it manually, the strips parallel to wall. For distribution of solution use the palette or the smoothing hammer. Begin works from that wall that it is located from exit further everything. Filling should be made without interruption not to allow differences.
After alignment it is necessary to give a ride to solution still the needle roller to remove the got air. Before full drying floor should be preserved against sunshine, drafts, sharp temperature drops. Small loads of floor are in a day admissible, but it will well harden only later couple of days. To stack any types of coverings, it is better to wait week.