Now high-quality air beds are considered as worthy alternative to normal. However unlike traditional dream bed, air beds more vulnerable: the small hole and bed will be blown off.
It is required to you
- - cleaning agent;
- - water;
- - set with patches;
- - scissors;
- - alcohol;
- - the rubberized material;
- - glue.
1. Examine air bed and listen to it: if the hole big that, first, it is noticeable well, and, secondly, air will go down is noisy therefore it will be possible to define quickly the place in which the mattress is punched.
2. If the air bed was punched on vacation, then submerge it in the next reservoir (sea, the river, the lake or the pool): the squirt of air will show those places which were worn out on air bed which need to be patched. Pull out the air-bed from water and mark the place of breakdown not to lose sight of it.
3. Do not try to submerge in house conditions the lowering air bed in water even: water rasplesntsya on all bathroom, and do not find hole. Shake up liquid soap or laundry detergent in small foam and smear with foam expected place of failures. Under the influence of the air pressure leaving air bed through holes, bubbles on penalty fee will increase. It is also air-bed place of failures. Dry up mattress.
4. Pull out from the set attached to air bed, patches and if it is necessary, cut patch of necessary form and the sizes. Stick all found holes. Give time I glue to dry up.
5. Carry out reinspection (having submerged in water or having smeared with small foam) and make sure that there are no holes any more. If suddenly nevertheless the new place of failure is found, and there are no patches any more, use any rubberized material (for example, it can be the camera from the bicycle) and special glue for pasting of rubber with other surface. Degrease surface alcohol, apply on it glue and paste patch.