Rabitz netting is idle time in use, economic material which allows to mount quickly protection, without resorting for this purpose to the help of the expert. The fence from grid chain-link represents light-weight construction which does not shade plant in garden, at the same time reliably protecting it from penetration of strangers.
It is required to you
- - level;
- - wire;
- - armature;
- - rope.
Instruction
1. To fix grid chain-link, it is necessary to mount basis of future protection. Usually the fence of chain-link is done on metal or wooden columns which are reliably driven in the earth.
2. Prepare columns for fastening of grid chain-link in advance. If it is wood, it needs to be oshkurit, processed special water-repellent mastic. Metal columns clean from rust, cover with paint or mastic for metal, besides, weld hooks for fastening of grid on them - it is optimal variant if you are going to make tension fence of grid chain-link.
3. If you are going to make frame fence, then except columns frames for fastening of grid will be required. Frames do of wood, weld from metal corners or profiles. Height of one frame – from 1 to 2 meters, width is better not to do it more than 3 meters. After frames are ready, to them, by means of collars or fine flexible wire, Rabitz netting fastens. Fix ready frames with the grid tense on them on driven in the earth, and it is better the concreted columns.
4. In case you have chosen the simplest type of fence from grid chain-link – as tension, it is necessary to drive at first all columns, starting with angular, and after that to fix grid directly to column. It or is fixed on the hooks welded in advance or if there are no hooks on columns, becomes attached to them by means of collars or wire.
5. It is necessary to pull grid as it is possible stronger that it did not sag. At first tie edge of grid to column and only after that pull it and you fix to the following column. Raise grid over earth surface by several centimeters if you want to protect it from excess moistening – if stack constantly adjoins to the damp soil, it will quickly decay.
6. On the top edge it is better to pass thick wire, rope, armature through grid – it will also protect grid from sagging. Will be useful also if you miss wire and through the lower edge.