In the house not to do without mirror. It not only obligatory attribute of the bathroom, but also in the hall it is necessary to make toilet and to smile to itself before exit to the world. It is good that now there are new technologies allowing to hang up mirrors without drilling of walls.
It is required to you
- Mirror
- Bilateral adhesive tape
- Silicone sealant
- Degreaser
Instruction
1. Before hanging up mirror, we need to protect amalgam layer from destruction to avoid the showered edges. It can be done, having applied aqueous emulsion ink layer on reverse side of mirror.
2. Then we do marking of that place where our mirror will hang. We put it to wall and precisely we circle with pencil.
3. Then we remove mirror. Our task is in completely to degrease acetone or alcohol the pasted surfaces. It is natural if at wall there is paper wall covering, they should be removed. Then we smooth out and we degrease as wall on which we will fix, and mirror.
4. Then we cut special bilateral adhesive tape on strips 7-10 cm long. We paste the prepared strips through each 15 cm on wall, surely vertically. Between them silicone sealant is squeezed out by big drops.
5. Then we take mirror and we put to wall. In the beginning the mirror lays down on sealant, and you have opportunity a little to straighten it concerning wall. As soon as the mirror concerns adhesive tape, alignment should be stopped. Further it is densely pressed, we fix mirror, and as soon as the adhesive tape was pasted, the mirror is fixed on wall.