Penoplex – fine thermal insulation material of new generation, it is easy, strong and durable. It is not difficult to mount it. Thanks to the excellent characteristics this material is always demanded not only in our country, but also around the world. In addition it is ecologically safe and pure, has low heat conductivity and practically does not absorb moisture. Therefore having decided to warm walls this material, you will make right choice, it is necessary only to learn how to fix penoplex.
It is required to you
- sheets of penoplex, paroizolyatsionny film, plastic dowel of dish type (80-100 mm) at the rate of five dowels on one sheet of penoplex, construction knife for material cutting, polyurethane foam (for splice closure), construction adhesive tape, copper vitriol, the perforator with drills, the hammer.
Instruction
1. Before that to begin to warm walls, they need to be prepared. First of all remove old wall-paper if those are available, then process surface anti-septic tank, for example, copper vitriol, it will allow to get rid from mold and fungus if the wall was chilled. After these actions it is possible to start directly penoplex mounting.
2. By means of adhesive tape attach paroizolyatsionny film to wall surface. Do not forget that the paroizolyatsionny film passes air only in one party therefore before fastening attentively look at what party you fix. After that it is possible to mount penoplex, begin work from floor with corner.
3. Material together is more convenient to fix. Hold plate, by means of the perforator drill 5 openings on corners and in the center, depth of openings should be done considering length of dowels. Now each opening should be filled a little with polyurethane foam and to hammer dowel. By the same method other plates of penoplex fasten.
4. That seams between plates were hermetic, fill them with polyurethane foam. It is necessary to warm wall completely, even at heating radiators. Now it is necessary to wait time in order that polyurethane foam has dried, for this purpose there are enough day. Remove all surplus, foams with construction knife and start covering of walls plasterboard or sheets chipboards.