Besides desktop and floor, the industry also fortochny and ceiling fans are issued. They demand not only connections to network, but also fixing. It is especially important to approach seriously this aspect concerning the ceiling fan.
Instruction
1. Do not attach the fortochny fan to glass at all. It can crack as at stage of drilling in it of openings or vvorachivaniye in them of screws, and how the device is successfully fixed - as a result of vibration. Completely remove glass from window leaf, cut veneer sheet by its sizes, in advance cut in it big opening for the fan and drill four small for fixture. Insert leaf into window leaf, fix it by the same way by what glass has been fixed earlier, let's putty harden, and only after it install the fan. In case the VN-2 device is used, make all necessary to exclude short circuit as conclusions at it are located very closely to each other. In window leaves of plastic windows it is impossible to install fans.
2. For fixing of the ceiling fan make sure in the beginning that the ceiling is suitable for vvorachivaniye in it of self-tapping screws and that they will sustain loading in the form of device weight and also the vibration created by it. In the beginning turn off supply of electricity, and then fasten the special plate which is included in the device package to ceiling, having turned its bottom towards ceiling and previously having passed through it wires. Connect these wires to those contacts of the terminal block located on plate which are specified in the instruction. The number of self-tapping screws has to be equal to quantity of fixing openings in plate, reduce it inadmissibly. You watch that they have not pierced the wires laid in ceiling.
3. Collect the ceiling fan in advance - on floor. Get up on stool and ask the assistant it to give you. Connect the connector on the wires which are going out of the fan to the reciprocal part which is hanging down from the terminal block. Move cup by the end of tube on the fan, put on it plate so that the position of joint of connectors has been closed. Slightly turn cup that it has been fixed in grooves. Ask the assistant to give you mounting screws and the screw-driver then attach them cup to plate.
4. Get down from stool, turn on the fan and make sure that it is efficient.