Probably, practically everyone came up against situation when at the most inappropriate moment the handle begins "to portachit": ink of the handle smears, so it is time to get rid of them.
It is required to you
- - ball pen with rod;
- - new rod;
- - flat-nose pliers;
- - flowing water.
Instruction
1. Pull out steel tip from rod of ball pen and merge the accumulated ink. If it is necessary that weight of the handle has remained, insert released from blackened rod back in the handle.
2. You will throw out rod (provided that nobody will already write with the handle). For preservation of weight of the handle you can use plasticine or steel balls with fraction.
3. Replace the rod which has got rid of the life cycle with new (in this case the handle will be able to write again).
4. Accurately pull out tip with ink from the handle "write-erase" (this kind of handles offers more expanded range of functionality). To pull out tip with ink, use flat-nose pliers.
5. Take out rod and wash out it under flowing water (do not wash out in hot water at all). Wash out until ink is not washed up completely, and the rod will not change the color from black or blue for, respectively, white.
6. Dry rod. Thrust it back into the handle and put on it the tip removed earlier.
7. Pull out tip with ink and you will throw out rod, and insert tip back (in this case the handle, of course, will not write any more, but on exterior you will distinguish nothing it from the "working" handle).