Sooner or later there comes the moment when your computer begins to buzz and rustle. It is signal that it would be time to clean and grease one of the coolers installed in the system unit. Not difficult task, but demanding patience and some skill.
It is required to you
- Computer,
- cooler,
- lubricating oil or other lubricant,
- adhesive tape,
- scissors,
- the syringe with needle, the screw-driver,
- Q-tips
- screw-driver
Instruction
1. First of all it is necessary to open the system unit to learn what cooler makes unpleasant sound and needs cleaning and lubricant. After we have defined what cooler is guilty in unpleasant sounds, it is necessary to switch off the computer and to switch-off the connector by which it is connected to the motherboard or power supply unit.
2. Further we unscrew screws by which the cooler is attached to the computer case or we disconnect the fixing devices attaching the fan to any given payment of the computer. After that it is possible to start process of cleaning and lubricant.
3. Carefully clean cooler. So that dust has not got inside. It can lead to the output of the device out of operation. Best of all for cleaning to use Q-tips.
4. Now it is possible to start lubricant. Accurately remove the sticker placed on the center of the fan. Remove rubber stub which hides the sleeve and axis of the fan.
5. By means of the syringe apply lubricating oil and zakuporta with rubber cover. You watch that oil did not filter when closing cover and did not get on that place where there was sticker.
6. Place sticker back. If it has lost the gluing properties, use adhesive tape. Cut off surplus of adhesive tape.
7. Now it is possible to put cooler into place and to connect it to the connector. Before closing of the system unit make sure that the cooler works regularly, having turned on the computer. Enjoy silence!