Blinds are made of fabric, metal, plastic, tree. Vertical or horizontal plates help to regulate air and luminous fluxes reliably. The correct installation is guarantee of faultless and reliable service during the long period of time.
Instruction
1. Mounting of blinds does not take a lot of time, but it will be required to observe certain parts and to consider some nuances. You can make installation in three ways: on each shutter of window separately, in window opening, with an overlap. Options depend on specifics of design and window openings.
2. Horizontal, vertical and roller blinds have the general scheme of assembling. At first make measurements depending on the chosen way. That the blinds established in window opening did not concern windowsill and sides of the aperture, from each party at measurement lower 2 cm. When mounting with an overlap add 5 cm from each party.
3. At installation of blinds on window shutter the exact sizes of shutter will be basis. Further mark fastenings, observing the principle of symmetry. Attach brackets to the marked plane, latch eaves. Make sure that the built-in fastenings will not interfere with functioning of barrier and turning gears of windows. From the regulating cord establish one additional fastening. Fix all fastening elements on wall or ceiling by means of dowels and screws.
4. After installation of fastenings hang eaves, on it attach lamels and runners. For this purpose connect the lower small weights to external and inside. The mechanism of management check work of blinds.
5. On plastic windows it is much more difficult to establish blinds. The special accuracy and accuracy and also skills of work with tools is required. Therefore it is better to entrust this work to professionals.