The extract is design which serves for ventilation of the room. During the operation of such device the polluted air is removed outside. The device consists of umbrella, the exhaust fan and air duct. Such equipment is dome, flat and built-in. If you want the extract in kitchen to be not evident, build in it the top locker over plate.
It is required to you
- - suspended locker;
- - extract;
- - corrugated hose;
- - screws;
- - box from PVC.
Instruction
1. Order suspended locker without bottom. By means of screws attach extract to its average shelf. In regiment and ceiling of such piece of furniture make additional opening for hose.
2. Attach corrugated hose one party to extract, and pass another throughout ceiling opening.
3. If locker with bottom, attach extract to its bottom and make in it one more additional opening for corrugation. Hide the body of extract the additional panel from the same material, as well as locker door.
4. If the area of extract is less, than the area of bottom of cabinet, cut in it opening by the extract size. Hide its body in locker and fasten to the bottom for openings in the lower edge.
5. If the extract takes away air in ventilation, carry out corrugation to air vent. Hide corrugated hose in special decorative box from PVC or gypsum cardboard. If the extract works in the recirculation mode, cut off corrugated hose at the exit from locker.