Agree that arches do the room special: they create illusion of scope. However when it comes to arrangement of door opening with oversizes, with dilators not to do without arches.
It is required to you
- - nail-catcher;
- - hammer;
- - hacksaw with small cloves;
- - measuring tool;
- - dowels;
- - self-tapping screws;
- - screw driver;
- - level;
- - arch set with dilators.
Instruction
1. Prepare aperture where the arch with the dilator will be established. For this purpose in advance remove door case, using nail-catcher and the hammer.
2. Collect one party of the arch: it is simple to make it, in standard arches there are round loose tongues.
3. Knowing width of door opening and the sizes of standard arch, calculate the necessary length of svodorasshiritel. Then postpone this length on the arch dilator and saw off the corresponding part of svodorasshiritel. By means of dowels fix the arch dilator between separate elements of the arch.
4. Having brought together one party of arch, attach it to door opening on self-tapping screws, using for this purpose the screw driver.
5. Adjust platbands longwise of aperture. For this purpose measure distance from arch eaves to floor or from horizontal marking to floor. In case the design of arch provides use of additional decorative elements, for example, of side small squares, reduce height of platband by length of decorative insert. After the necessary length of platbands is determined, postpone it and in case of need truncate platbands.
6. Having established platbands on the one side of aperture, insert internal part of the arch. However before adjust plates of internal filling: width filling is equal to wall width with additional allowance of 10 millimeters (this stock is necessary for fastening of plates in grooves). To hide slots between vertical plates and horizontal internal plate, establish connection level.
7. By analogy collect the second part of the arch and attach it to the second party of aperture. Make sure that the arch is established exactly and its four elements lie in one plane: for this purpose by means of level measure corners and horizontal.