You live in the city or behind its line, you use water supply system or are the happy owner of the well, well – it is not so important, additional water treatment is necessary everywhere.
It is required to you
- - filter for water;
- - tools;
- - film FUM or tow.
Instruction
1. Installation of the filter for water does not demand special skills, just attentively read the instruction. All necessary goes complete with the filter.
2. Drill in table-top or in washing opening, install in it the crane for clear water. Usually it is done away from standard tapping cock.
3. Block the crane of supply of cold water on kitchen, disconnect the flexible hose connecting the crane to pipe. Install the T-coupler (it is used for connection of pipe PVC with pipes from other materials) on pipe, condense thread with special means (film FUM, tow). Attach to it the hose going to the crane with cold water. Screw the filter crane in the T-coupler.
4. Collect the filter from accessories. Connect to it the hoses which are included in the package: on entrance and on exit. Previously remove from them shipping stubs. Hoses join by means of quick disconnect collet clips (usually they are included in the delivery package).
5. Pass the hose going from the T-coupler through nut and pull against the stop on the union of ball valve of water supply. Densely put the clamp. So you have connected water input on the filter.
6. Having fixed the crane on washing or table-top, do not forget to put on it the top washer. Tighten fastening nut, winding it on hollow tube with thread. Insert percussion cap into hose. Setting it, for example against wall, enter almost up to the end, outside there have to be no more than 1.5-2 mm.
7. Do not heat hose, trying to expand it and to facilitate work – so it will deteriorate and at you reliable connection will not turn out. Then make connection by means of collet clip to the crane with clear water.