Modern security systems are capable to provide to the car the maximum protection against hijack and external influence. Alarm systems of model range Starline also belong to such models. They have maximum of necessary functions, are resistant to influence of the scanning systems, and at the same time are easy to use.
- Drill;
- - side cutting pliers;
- - screw-driver;
- - insulating tape;
- - tester;
- - self-tapping screws.
1. Let's try to deal with installation of the Starline A61Dialog alarm system. In set of the alarm system there is main unit of the alarm system, connectors with wires which need to be connected to the block, the blow sensor, the Valet button, LED, the antenna. The siren, as a rule, is not included in the alarm system package. Therefore, you can choose for installation either normal siren, or autonomous which prevails power supply directly from the car accumulator. In set there are two instructions: on installation and the user. For a start you need the installation instruction.
2. Insert into the alarm system block connectors with wires according to the scheme specified in the installation instruction.
3. Establish LED in driver's rack.
4. Fix from above in the center of windshield the antenna which will transmit signal to alarm system charm. It can be fixed and under the torpedo that the malefactors who have got into the car could not break it, thereby having interfered with signal transmission. Reception of signal under the torpedo, of course, will be worse.
5. Fix the sensor of blow on metal part of guide post. The sensor fastens on self-adhesive film. But it is possible to strengthen it collar or having put on the self-tapping screw.
6. The button of emergency shutdown of the Valet alarm system arrange in any the location, comfortable for you. But at the same time the button has to be hidden from public eyes. If you install it on the block of safety locks, then it is desirable to program the new personal code for emergency shutdown of the alarm system of t. to the standard code to all it is known.
7. That the alarm system notified the owner, it is enough to connect minimum of wires. Connect black wire on the mass of the car, red on plus, yellow wire on ignition. Blue with black strip (or red) – connect depending on polarity of ends. In these cases the alarm system will work on opening of doors, blow and to transfer information to alarm system charm. It is possible to call this scheme of installation the razed t. to the car does not blink blinkers and the siren does not shout.
8. If you want to connect external annunciators, establish siren in cowl, having fixed it on self-tapping screws. Put end in cowl and stretch two wires from the alarm system. For light signals connect green from black (or from yellow) strip wire on indexes of turns or marker lights.