The built-in household appliances strongly have entered our life. She allows to make interior of kitchen more refined, and access to devices - convenient. However increased requirements are imposed to the built-in equipment, installation assumes it preliminary preparation of places in which any given household appliance will be placed.
1. Define those places where you intend to build in household appliances. The widespread mistake is that plans for equipment of kitchen the built-in equipment are formed after completion of finishing of the room. It can complicate mounting of household appliances and leading of necessary communications.
2. In advance count, electric wiring where and as water will begin to be brought and drained will be laid where exactly. It is necessary to make it even before the termination of finishing work, otherwise you should strobit, for example, anew the painted walls the perforator that will give inconvenience and will raise the price of repair.
3. Prepare necessary tools and materials which will be necessary for installation of household appliances. From you laying of electrical wiring, installation of additional automatic machines and sockets in convenient locations, mounting of air ducts will be required. It is possible that the built-in equipment will demand also transfer of sanitary communications.
4. At installation of the built-in gas equipment use the flexible hoses which are specially intended for this purpose. They are usually marked in yellow color. If alteration of the metal bringing pipes is required, it is recommended to invite for this purpose specialists gas-men as gas communications have to be installed by the organization having the corresponding permission.
5. For connection of the devices using water (for example, washing or dish washer) stock up with plastic pipes and flexible hoses. Pay attention to marking of hoses; by red color the eyeliner for hot water, blue is marked – for cold. Main issue at installation of such built-in devices – competent fitting of pipe which, as a rule, fastens among themselves by means of the special welding device.
6. When embedding surely provide placement in kitchen furniture of household appliances near it the electric socket, to the corresponding power consumed by the device. Before installation attentively study the operating manual of engineering device. Some devices demand laying of special wiring and ground cable. At non-compliance with this requirement the failure of the automatic machine is possible and the guarantee for the equipment ceases to extend.
7. If you are not too sure of the forces, charge installation of the built-in equipment to the professional electrician (the gas-man, the plumber). As a result it can cost cheaper, than elimination of shortcomings of mounting which will be revealed later.